Sealcoating is a crucial step in protecting your asphalt driveway from harsh elements. The sealant forms a barrier that prevents water, oil, and gas from penetrating the surface and damaging the underlying asphalt. It also helps to keep out dirt, dust, and other contaminants.
The sealcoating process is usually done during the day by qualified contractors like Highway Masters Paving, when the asphalt is warm and the sunlight is shining. This allows the sealant to adhere properly to the surface and creates a durable finish. However, there may be times when nigh time sealcoating is required, such as in colder weather or for emergency repair.
But is this effective? Can you do asphalt sealcoating during nighttime? Read more as we’re going to discuss this matter in today’s post.
Instances When Sealcoating During Nighttime Is Necessary
There are a few instances when sealcoating can be done at night. One is when there is a parade or other event that will cause a lot of street closures. In this case, the asphalt needs to be sealed so that it doesn’t get damaged during the closure. Another time is when there is a lot of construction going on and the sealcoating needs to be done in order to protect the asphalt from being damaged.
How It Differs From Sealcoating During Day Time
Nighttime sealcoating is a process that is used to sealcoat asphalt surfaces at night. This is done to avoid the heat of the sun and to prevent the sealant from drying too quickly. The process of nighttime sealcoating is similar to that of daytime sealcoating, but there are a few important differences that you should be aware of.
One of the most important things to remember when nighttime sealcoating is to apply the sealant evenly. If you do not apply the sealant evenly, it will not adhere to the surface properly and will not provide the desired results. It is also important to make sure that you do not apply too much sealant, as this can cause the sealant to run and drip.
Another difference between nighttime sealcoating and daytime sealcoating is the temperature at which you should apply the sealant. Nighttime sealcoating should be done at a lower temperature than daytime sealcoating. This is because the sealant will not dry as quickly at night, so you will have more time to work with it and apply it evenly.
Finally, nighttime sealcoating should be done in an area that is free of traffic. This is because the sealant will take longer to dry and will be more susceptible to being damaged by traffic. If you must sealcoat in an area with traffic, be sure to use caution and apply the sealant sparingly.
Is Nighttime Sealcoating As Effective As Day Time Sealcoating
There is no definitive answer when it comes to whether sealcoating is more effective during the day or at night. Some contractors believe that the heat of the sun can cause the sealant to dry too quickly, which may not allow it to cure properly and could lead to problems down the road. Others claim that the cooler temperatures at night can actually help the sealant to cure properly and last longer.
And in some cases, it is believed that the darkness lends itself to a better-finished product, as it is harder for people to see what is going on and there is less chance of someone walking in the middle of the job and messing it up. While other contractors believe that the temperature can play a role in how well the sealcoat adheres to the asphalt, and that working at night when it is cooler can be more effective.
Ultimately, the effectiveness of the process can be done as long as the correct products are used and the surface is properly prepared. It is generally recommended that a contractor takes into account the temperature, humidity, and wind conditions before deciding to apply sealcoating during the night.
Is Nighttime Sealcoating Cheaper
Actually, some factors that could affect the cost of sealcoating include the amount of labor required, the number of materials needed, and the specific location where the work is taking place. Generally speaking; however, sealcoating during nighttime hours may be cheaper due to less traffic and fewer people working on the project. Contact your local sealcoating company for a more accurate estimate.
Final Thoughts
Overall, it is recommended to hire a professional contractor who is experienced in sealing asphalt pavements during nighttime. They will be able to do the job quickly and efficiently, and you can be assured that the job will be done right.