We have over 25 years of experience!

Asphalt Paving, Concrete Work, Seal Coating, Striping and General Engineering Services Insured and Bonded For Your Protection.

How Long After Paving Should Asphalt Be Sealed?

How Long After Paving Should Asphalt Be Sealed?

When properly cared for, your driveway may endure for many years. Consistent inspection for cracks in your asphalt and prompt repair are all part of preventive maintenance.

Asphalt driveways that have been sealed regularly are more resistant to degradation and will endure longer. Water cannot penetrate the asphalt, preventing individual stones from degrading and creating fractures.

If you want to keep your asphalt pavement in good condition, you must seal it. If these fractures are not taken care of, they will develop into potholes. Repairs and replacements will be more costly as a result of this.

Your asphalt driveway bears the brunt of the traffic coming and going from your house, so it’s worth the investment. As a result, knowing how long after asphalt paving should be sealed is quite significant. If you’re serious about sealing your driveway on time, you’ll need to be patient and use high-quality supplies.

What is Asphalt Sealing?

It is possible to get a 20- to 30-year life out of an asphalt driveway if it is correctly placed, even with the continual friction of tires that wear away the top layer of the asphalt pavement. As a result, the asphalt’s structural integrity is preserved for an extended period. In time, water seeps into the eroded area. It might cause the asphalt to crack, which can be dangerous and detract from the appearance of your home.

Although asphalt is long-lasting, it isn’t adequate for a driveway. Over time, it will fracture or become brittle if exposed to the sun’s harmful rays, oil, snow, and other pollutants. The appearance of your driveway might be significantly impacted if it is not fixed. In a worst-case situation, potholes may cause wallet-burning damage from fractures in the road. Asphalt sealing is a way to provide your asphalt with a second layer of protection. When you seal your asphalt correctly, you can ensure that it will last longer. If you own a house, it may potentially increase its value.

How Long After Asphalt Paving Should Asphalt Be Sealed?

Curing and hardening of asphalt take at least 90 days. To prevent cracking or damage to the asphalt underneath your sealant, you should wait at least 90 days, if not a year, before sealing it. Keep in mind that sealing is necessary when the surface starts deteriorating.

The sealer will seal in the asphalt’s pliability-enhancing lightweight hydrocarbon oils if applied too early. Tires and other pointed things, such as bike kickstands or heavy sports equipment, may easily mark asphalt. To be on the safe side, give it at least six months.

Preparation Is the Key to Success.

A seal applied at the right moment may help avoid potential harm to your investment. The temperature should be between 50 and 90 degrees Fahrenheit for optimum adhesion. It’s best to wait at least two days after applying the sealant before it rains if it’s the rainy season. As the years’ pass, a high-quality coal tar sealer will keep water out while also resisting damage from wind and dust. Consider the weather, the amount of traffic, and the asphalt position before you invest in a sealer. Please commit to reapply the sealant every three to five years now that you’ve sealed it.

Why is Asphalt Sealcoating Necessary?

Sealcoating a parking lot or driveway has several advantages, even if it isn’t an essential part of routine asphalt maintenance. Car fluids, such as oil, gas, or antifreeze may cause damage to the surface if not properly sealed.

Bitumen and aggregates are the two main components of asphalt. Aggregates, a combination of sand, crushed stone, and gravel, make up about 95 percent of your asphalt. Bitumen, a black substance, is the glue that ties the various aggregates together.

Cracks and potholes may appear in asphalt, even though it is a solid material. Damage to your asphalt may occur from the sun’s rays, oil, snow, and other chemical compounds. One of the leading causes of asphalt cracks is heavy traffic. Sealcoating is the only method to keep it in good condition.

It’s a must if you want to safeguard your most prized possession. Seal coating is the way to go if you want your driveway to endure. Cracks and potholes caused by asphalt that is not adequately maintained might cause severe structural damage to your home. Seal coating is cost-effective in the long term, and it may make your driveway appear substantially better.

Choosing the best paving firm to seal coat your asphalt pavement is essential to getting the most out of your investment. Contact Highway Masters Paving now for your paving needs.